NE regionals 2017 - Pre Batley.

NE BRCA outdoor regionals 2017 ............. here we go!

Batley, 23rd April 2017

Batley, once a UK national track that admitedly has seen better days, has been a big part of our RC history in the UK.... and maybe further than that (cast your mind back to the secret Losi test days in 2005 with the USA team.)

 ... it's all to play for and every one of the 68 pre booked in competitors will be arriving with prepped cars and hopes of a sunny dry Batley track ...... unlike last year:

 ........ 2016 flashback: 

"With F1 Craig Collinson already regional champion, he watched from the sidelines as the rest of the region battled for the Batley spoils.

The Batley track varied between wet and damp all day, with frequent rain showers. Schumacher Silver Minipins seemed to be the tyre of choice for the rear, with Schumacher silver wide stagger ribs on the front for most. "

TQ was taken by Schumacher driver Neil Adamson, taking 3 of the 4 rounds of qualifying.

The final remained a slippery affair, and a few position changes took place, with the final result:

1 - Chris Pattinson - Schumacher K2
2 - Jeff Steele - Schumacher K2 (and fastest lap)
3 & TQ - Neil Adamson - Schumacher K2
4 - Chris Clarke - Schumacher K2 (Top Vet)
5 - Phillip Carrick
6 - Neil Hamilton
7 - Richard Coates - Schumacher K2
8 - Kevin Brewer
9 - Lee Talbot
10 - Jack Hirst

In the damp:

And from the year before, in the dry:

Onto 2017

Tyre change for 2017:

A decision was taken to limit the number of tyre tread patterns allowed for 2017. This was an effort to limit the cost and quantity of tyres purchased by our racers. And so, for the whole NE regional series, tyres are limited to Schumacher Minispikes or Schumacher MiniDarts, and Ballistic Buggy Spikes.

http://www.racing-cars.com/

This in effect means no one needs to buy Minipin tyres for the series.
Feedback has been positive, to the point where for 2018, it has been suggested only two tyre types be allowed.

Shop:
Mike Parker will be there with his model shop, for all of your tyre and other needs.
http://number5rc.co.uk/


Booking in:

Seeded (on F rating) booking in closed on Thursday, and so 68 drivers will be seeded, this is up from 2016 Batley 4wd entry of 50 drivers (incl non regional).

Unseeded booking in will be open on the day.


Drivers listing observations:

Nice to see a few regional aces from the past booked in, Ben Riley, Graham North, Arslaan Butt, Greg Williams. Should be an entertaining meeting. Also a great entry from NEAM on there, hope we all have a good away day!

4wd chassis:
Nice to see a good mix of 4wd cars out there this year, PR Racing, Team C, Serpent, Kyosho, Schumacher, Xray all well supported.

Nice to see some of the lads are ready to roll already:

If you need any help with your cars,  there'll be plenty of support available. Just pull someone aside that has the T shirt on, or is running your brand of car, and I'm sure you'll get a lot of help and advice.

Regional novices:
Its a fun day out racing at a different track, against members from other clubs. That's all. A chance to race against different people. The main thing is, enjoy it, and don't be shy in asking for help from your fellow club members. If you're stuck for anything, having travelled all that way, just ask someone for a bit of help.

If you're racing outdoor compared to indoor, you may want to raise the rideheight of your car up a bit (19mm / 20mm as a guide), and walk around the track to familiarise yourself with the bumps and layout before you drive.

Track information:
Location:
Spenborough address:
Spenborough Sports Centre & Pool Complex
Bradford Rd,
Liversedge
WF15 6LW

Lets get it on:
Hopefully, I'll have time to take some pictures and get some notes made, and get a race report up following the meeting.

Regional information:

BRCA North East Regionals Dates 2017

Sunday 23rd April 4wd Rnd 1 Batley
Saturday 26th May 2wd Rnd 1 RHR
Sunday 27th May 4wd Rnd 2 RHR
Saturday 25th June 4wd Rnd 3 South Shields
Sunday 26th June 2wd Rnd 2 South Shields
Saturday 22nd July 2wd Rnd 3 Teesside
Sunday 23rd July 4wd Rnd 4 Teesside
Saturday 19th Aug 4wd Rnd 5 Bury
Sunday 20th Aug 2wd Rnd 4 Bury
Sunday 3rd Sep 2wd Rnd 5 Batley

As always, for all your RC needs:
Schumacher Racing

Schumacher KC - 3 meetings old, setups, findings and results

KC update.

So I've now ran the car at 3 different meetings.

And I can't wait to race it again.

It feels so neutral to drive, yet the lap times are so fast.

Here is a little summary of the meetings, setups, changes I made and what affect they had:

My NEAM carpet setup:

Chris Pattinson - NEAM setup

My Worksop setup:

Chris Pattinson - Worksop setup - A final 8th

Despite my success, it'd be hard to ignore the pace of the winner's car -  Danny Mcgee's car - at Worksop.

Here is his winning setup:

Danny Mcgee Worksop winning setup


I also got quite a bit of strength testing done on the car. I clipped the inside pipe going round the sweeper that threw the car into the brick wall at full speed. Snapped a turnbuckle, but the rest of the car survived, which bodes well for the quality and design of the plastics.

Schumacher KC + average club racer

Average Club racer tries out a Schumacher Cougar KC

Available from Schumacher Racing - : http://www.racing-cars.com/pp/Car_Showroom/Cougar_KC.html

## Please read the following considering I am not a top driver .... and my setups etc are personal preference, usually providiing a well balanced car, rather than a razor sharp car. I am sharing my experiences considering how I feel the car has improved my racing, and how I run the car.##

An experienced guy once told me, you can give the top drivers any car, and they always do well, however a real measure of how good a car really is, is when you look at club racing, so here is my review of my first 3 days with a KC, for what it's worth, I'm not blisteringly fast, or particularly mechanically minded, but maybe thats just like you?


Reviving the blog:

Its not very often I in this blog, so it's taken something special to revive it.


My Previous 2wd cars:

• Associated RC10 B4
• X Factory X-6 sqd
• Centro C4.1
• Kyosho RB6
• Schumacher SV2
• Schumacher KF

Let me put this review in perspective:

I received this kit 3 days ago. I built the car from 10pm Friday night, until 3am Saturday, not ideal, but the only time I had available.

And here I am, having built it in five hours, and raced it once, feeling compelled to write a review, the car has been that impressive.


Why a KC? Why now?

Those that know me, will know I keep my cars a very long time, and very rarely change. Even with Schumacher releases, I am slow to adopt the new cars, sticking with the SV2 upto 1 year into the KF release for example.

However, looking at the improvements in Schumacher 2wd results in the short time the KC has been available, was enough to convince me to buy into the KC early.

Orlowski - EOS win (carpet)
Yardy - British Winter Open Win (carpet)
Williams - UK Masters TQ (low / medium grip)
Neal - British Winter Open 3rd place (carpet)

The build:

Schumacher builds are widely recognised as one of the best (both manual and parts organisation), and it was a pleasure to build. The fit and finish was excellent.

Prior to this build, I would've agreed the Schumacher builds were well organised, and clearly documented above the other manufacturers I had experienced. However, there were some other brands that had superior parts, fit, finish and materials.

Considering the latest 4wds (K1 and K2), I thought these were on par with the best, but never thought the KF was up there with the premium brands. With the KC it became clear the bar has been lifted, and the KC is now up there with the premium brands.

Examples of good bits?

The best example is looking at what most will consider a carryover front end.
However, if we consider the front right outer hingepin on the SV2 / KF, I found it needed checking as it had a tendancy to work loose with suspension movement. An alternative method of fixing, when I ran Associated, I understood the binding that could occur with captured hingepins. The KC now uses an outer hingepin keyed into the wishbone with a retaining grub screw locking the pin in. Brilliant. 

Shock tops: On all of my previous cars, the alloy shock tops / or alloy pivot ball within the shock tops, had a tendancy to wear, creating quite a bit of slop in the top shock mounting. The new KC has a super strong plastic ball cup mount, which pairs up with the alloy shock body and collar, and steel ball stud, to create a precise fitting, and low maintenance cost, high performing shock top. I was initially concerned with the strength of, and reliability of the shock caps, but from handling them, and really strength testing them with my crashes, I have no worries. As with the other ball studs on the car, there is a small hole allowing access to the hex drive of the ballstud, which means the shocks tops do not need to be 'popped' off.


Also, with them having the optional bleeder holes, they are multi functional, sealed or vented depending on if you drill them or not, so more options covered in the kit. Speaking of which, with all of the belts, layouts, shims, spacers, and holes available, all in the kit, this kit really does have it covered for all conditions.

^^^^^^^   yes that's a KF bodyshell mounted on there, until I get my KC shell painted ^^^^^^

.... and body off shot:

What setup?

I was booked in to attend a North East regional @ MBmodels, an all carpet tight indoor track.

An area I feel Schumacher are ahead of the game, is the wide variety of setups from A team drivers, which are a great starting point for everyone else.

So I went with Orlowskis EOS winning setup:

http://www.racing-cars.com/images/Technical_Info/Schumacher/Current%20Cars/Cougar%20KC/Set%20Up%20Sheets/KC_MO_EOS_R3_Trencin_SK_print.pdf

.... with the following changes: Front shocks moved to inside hole on wishbone to get a bit more turn in around the hairpins at this particular track, and moved rear shocks to outer hole on wishbone to prevent the rear collapsing on power going onto the straight.


I'd only been to this carpet track once before, for 3 x 5 minute runs 6 months ago. So effectively, I wasn't familiar with the track. The track is attached to a shop, and there are some very very fast locals who work in the shop, or live nearby. I knew this would be a difficult meeting.

In the 3 minute practice, the car felt very natural to drive, very well balanced. I always felt that all of my previous 2wd cars had a balance that was very speed / throttle sensitive. Whether it was a little understeer on power or off power, coupled with oversteer on power or off power, I never found a really well balanced setup. From the first few laps, the KC felt so well balanced, to the extent that I didn't need to get used to the car at all, because I didn't need to compensate for any handling traits. My only concern was, how would the lap times appear, as I usually associate an easy to drive car with not optimising lap times.


Mechanic at fault

I must admit, that havnig finished the car at 3am, I had taken (notably one) shortcuts. The rear turnbuckles ... I pulled turnbuckles from another car, and popped on the KC. It was to be my undoing.

Rd1 - I rolled the car, several cars piled into me, and popped the turnbuckle off (the one I had stolen from another car). The marshall popped it back on, but I only managed 36th in round. Individual lap times were good though, maybe 0.7s per lap slower than the top locals.

Rd2 to 4 - Despite a few big crashes into immovable objects, the car held together really well. Strength test successful. My lap times closed a bit nearer to the fast locals, as I became more familiar with the track and the car.

I qualified 5th overall.

Final - After a bit of a messy start, I got up to 3rd on the track, behind Jack Hirst, and James Helliwell (TQ). I was around 3 seconds beind at the 3 minute mark, but managed to close the gap and get back into the race with them with around one minute to go. Jack made a mistake, and I was briefly up to 2nd, before Jack recovered from the mistake (don't ask). I then pushed to get back to 2nd place, rolled, and the turnbuckle popped off again. The lesson here is not to take shortcuts in the build, and use the Schumacher parts.

FInished up 4th:

Electrics:

ESC - Hobbywing v3.1
Motor - Thunder Power 7.5 geared 24/83
Cells - Nosram P5 LCG shorty
Servo - KO RSX2 response

In Summary:


Such a well balanced 2wd car, I could concentrate on racing lines with confidence, and throw the car at the track if needed. I was much faster with the KC, than I could've dreamed of with any of my previous 2wd cars.

I found the KF / KF2 always wanted to over rotate on power, but this KC had no tendancy to do this. I suspect the real test is in 2 weeks time at the UK Masters on a low grip surface, however A team drivers have already reported that on power, and on breaks, the car remains balanced and controllable on line. I think this is due to the new central transmission, and the motor rotating the opposite way to what it does in the KF.

It seems incredibly strong, easy to build and maintain, with great support and setups already emerging from a wide driver base on all surfaces.

Video of the race:
My car is the blue car running in 3rd , starting just off camera (the pink and black car is 1st, the white car is 2nd). Probably only worth watching from 3mins to 5 mins.

https://youtu.be/QAeU0hYoq3g?t=3m8s

Thanks to Davey Liddle for the video.



The Schumacher KC is available from http://www.racing-cars.com/pp/Car_Showroom/Cougar_KC.html
Thanks to Mike Parker www.number5rc.co.uk for your support, and painting skills. Check Mike out for custom paint jobs, or his model shop for all your hobby needs.


I must add that I am a sponsored driver for Schumacher Racing www.racing-cars.com , however I would not be running these cars if I didn't believe they were the best cars out there in 1/10th electric. Thanks to Schumacher for their support, and the provision of a quality RC car.

NEAM racing at Seaham 17th Feb 2013

For more info about racing at this venue, please see:
www.neamrc.co.uk
Sunday nights racing in the North East 6 til 10 pm


Following on from last weeks 3 rolls of carpet and 2 table tops, we had to go one better, 3 rolls of carpet and 3 table tops.

Carpet carpet carpet......
Most people only wanted 2 rolls of carpet, and I think it wouldve been more fun with only the 2 rolls, but we have a lot of newer drivers attedning the club at the moment, which is great .... and it makes it a lot easier with more carpet down.

Table Top Table Top Table Top ....
Thanks to Ian Dalziel, we had a fantastic new table top support to make our corner table top. This was very solid and was a big success. This freed up equipment to build another two table tops one after another. When building, it was anticipated you could hop onto the 2nd table top, but the track didnt allow cufficient corner speed to be carried, and the quickest way over these was to use both down ramps effectively.

A busy practice session ensued, with a few new drivers on the track, getting their first fix of RC racing, great to see.
Racing kicked off at around 19:30, slightly behind schedule while setting up the new laptop. But once setup, the laptop worked great with 33 drivers booked in, and ready to hit the track. We had a full range of drivers, from first time drivers (Declan with his Ansmann X4TE)



to someone who once posted times in the worlds top ten.....Mr Snee using brushless technology for the second time only in an old B4.

From the Worlds 2003:



The track drove really well. Head of team Williams commented that it looked fast at first, but when driven, it didn't carry the speed that it first look like it could have. Great to drive your lines on, and a nightmare to get past a car.

Personally Speaking, my SV2 was going really well, as it has done since I got a setup together on it. I tried minipins in practice, but they were too worn, so I went to yellow minispikes on for this week.

It's really stable on power, and has plenty of steering ...... but it's interesting to note how a car can suit some people, and not others.
I gave a few people a shot of the car .....
Chris Green "I dont like it"
Jeff Steele "Your throttle profile has no power, and it lacks steering"
David Snee "It's ... weird.... really different to the B4"

And so..... after 4 rounds of qualifying, it was a pity we didnt have time to sort into proper A and B finals, because we wouldve seen that storming performances from Mike Pemberton, Ryan Mould, Paul 'Gold Tub Corky' Johnson:

 



...........and .............. the flying  Davey Liddle:

 would've seen them in a 10 car A final! Some super fast laps going in from these guys.



The unsorted A final was kindly captured by David Liddle .....



I had a good race, with a couple of little errors.  I think Snee got tagged early on, and was fighting back from last position.
Mustve been a good race though, as Rob, Nat and Snee finished within 4 seconds of each other.
Click the results to make them readable:

I unfortunately missed vdeoing the next final, as I was marshalling, which was unfortunate, as Mike Pemberton is really getting back on form follwing his break from racing, now that his B4 is becoming less seized up. Scott Tinkler was also flying, and seemed happy with his B4 on the carpet track. Both Scott and Mike finished on 18 laps, 2 laps ahead of the others, with Mike pipping Scott to the line in the B final by 7/10ths of a second, and both drivers getting into the low 16s lap times.

Click the results to make them readable:

C final:

Here are a few laps from the C final:

Again, without sorting the finals, it's obvious Richard Harrison was too fast for the heat.

His qualifying time wouldve put him at the sharp end of a 10 car B final.

At the same time, Dean's super fast form from last week was interuppted a little as he had some issues with his yellow and red B4. With a loaner car (Greg Williams Cougar),

Dean went well, but the minipin tyres and  the limited speed held him back from the previous week's confident form. Next was Declan in a respectable 3rd place with his improving (slowed down) Ansmann, and improved driving.......

 followed by Tyler who put in some really consistent laps for the second half of the race, to get 4th place. ....................

Nathan was looking much happier with his now sorted SX3, but had an unlucky final....

Result:

The next heat .... heat 4, and Davey Liddle would've ended up 6th in the top heat with his storming final time. The consistency of David's laps was incredible, just watching the car, it looked easy to drive, and was hitting the right lines around the track .... if you ignore the first lap, all of his laps were within 1.6 seconds of each other.

Second was Steven Forster, who was fastest in the heat, with some mid 16s hero laps with his X6sqd, but the odd 22s lap spoiling his run.

And Marks car looked great:

Results .... tilt your head:

And finally.... at the end of an unusually late night.........

Heat 5:

With Ryan and Graham both hitting 18 laps on top 10 pace, it was a great race.

Ryan eventually winning by 4 seconds.

The race looked really clean, with all drivers getting into the sub 18 second laps.

Results:

NEAM racing at Seaham

For more info about racing at this venue, please see:
www.neamrc.co.uk
Sunday nights racing in the North East 6 til 10 pm

So ... we had the new timing equipment.
Some teething problems meant that despite a 5 oclock start for some of us, we didnt hit the track until 7:45, so there was plenty of open practice, and as a gesture of goodwill by the club, a free nights racing due to the delay.
For a change, it was decided to run 3 rolls of carpet (as opposed to the usual 2), and so  the grip was up quite a bit. This change was welcomed by a a lot of the drivers.

The track was really good, with a really good flowing line, a ripple section, small tricky jumps, and a corner table top into regular tabletop.

Qualifying went really well, with great driving throughout the field.
After qualifying, these were the positions:

Finals followed, videos shown here (apologies, I didnt catch the C final).

Results:

B Final winner David Pack
Runner up Natalie Williams.

Natalie got really close to David at around the 4 minute mark, as David ran wide passing Jason, Nat hit Jason's car and a tumble saw her chances for a win disappear..... shown below:

A final:
1st Chris Clarke
2nd Chris Pattinson
3rd Andy P.

This video mainly follows Jeff leading with Chris Clarke following, and me trying to catch them. Jeff then makes a mistake meaning I had to try and hunt down Chris' Durango for the win, but unfortunately, I was pushing too hard on minipins, clipping a corner and rolled after the sweeper at the end of the straight.

Video also features Paul "Corky" Johnson pushing his Vega B4.1 into the A final mix.

More pictures of the evening:

Keith's Cougar, transparent styleee.....

Paul AfroP hops onto the corner table top, turns, and then down, this is how most were driving this corner, including myself.....

.... but Dexter shows how to jump the tabletop altogether, commited driving as always! .... not many were able to do this .....

shown above ...B Final WInner David Pack .. flat and neat.

and below, runner up Natalie Williams showing more style for the camera....